Generator sets can be paired with a power unit however it is imperative to note that generator engines use a fuel pump specific to generator applications with HP ratings for continuous, prime, or standby power. Usually, industrial power units have a fuel pump not rated for a fixed RPM application. The governors on generator engines are rated for a specific duty cycle to maintain fixed RPM for clean electricity generation. Note: Units may be converted for a generator but we do not do that work here.
About Component Build Power Units:
Our long block and extended long block assemblies are considered ‘component builds’. A new component build power unit is an engine assembly built back to popular configurations using roughly 90% OEM parts, 10% Aftermarket when available.
New Component Builds Power Units do include limited rebuilt and/or remanufactured components when necessary but frequently they are non-critical wear parts such as aftercoolers, exhaust manifolds, water inlet and outlet connections, gears, gear housings, etc. Each build cycle we do is different and follows compliance emissions/rebuilding standards governing re-use guidelines.
Cummins Power Units Gallery
Cummins Power Unit Packages:
Cummins 4BT Power Unit Package: 105 HP
Parts List:
✓ Block | ✓ Housings (Front and Rear) |
✓ Cylinder Head | ✓ Brackets and Pulleys |
✓ Camshaft and Lifters | ✓ Fuel Transfer Pump |
✓ Crankshaft | ✓ Holset HX40W Wastegate Turbo (High Mount Front Out) |
✓ Connecting Rods | ✓ Starter 12 Volt |
✓ Rocker Assemblies | ✓ Alternator 12 Volt |
✓ Gaskets, Rings, Seals, Wrist Pins, Bearings | ✓ Flywheel/Flywheel Housing (SAE #3) |
✓ Inline Fuel Pump | ✓ Skid Mounted |
✓ Radiator | ✓ Base Fuel Tank Included |
✓ Air Cleaner | ✓ No Control Panel, Converter, or PTO Drive |
✓ Oil Pump and Water Pump | ✓ No Core Charge |
✓ Oil Cooler | ✓ Run tested before shipment |
✓ Oil Filters | ✓ Standard 12 Months Parts Replacement Warranty (Engine Only) |
✓ Oil Pan | ✓ 1 or 2 Year Parts/Labor Extended Warranties Available |
✓ Intake and Exhaust Manifolds |
Note: Murphy® Instrument Panel with Shut Down Protection, Charge Air Coolers, and Leg Mounted Radiator Packages are available for purchase for Cummins engines.
Cummins 4BT Power Unit Specs:
Weight: | 726 lbs (Engine Only) |
Configuration: | Inline 4 Cylinder (I-6) |
Displacement: | 3.9 Liters, 239 cu in |
Horsepower: | 105 HP @ 2800 RPM |
Torque: | 243 ft/lbs @ 1500 RPm |
Cummins 6CT 8.3 L Power Unit Package: 260 HP
260 HP CPL: 0399
Parts List:
✓ Block (5260561) | ✓ Housings (Front and Rear) |
✓ Cylinder Head (3939346) | ✓ Brackets and Pulleys |
✓ Camshaft and Lifters (3415452) | ✓ Fuel Transfer Pump |
✓ Crankshaft (3917320) | ✓ Holset HX40W Wastegate Turbo (HMRO) |
✓ Connecting Rods | ✓ Starter (5255292) 24 Volt |
✓ Rocker Assemblies | ✓ Alternator (3415691) 24 Volt |
✓ Gaskets, Liners, Rings, Seals, Wrist Pins, Bearings | ✓ Flywheel (138 Teeth Ring Gear, Ring Gear Pitch: 8/10) |
✓ Thermostat (1x – 180 Deg F) | ✓ Flywheel Housing (SAE #2 ) |
✓ Inline Fuel Pump (Inline Setup) | ✓ Over Center Clutch Flywheel |
✓ Jacket Water Aftercooler | ✓ Skid Mounted |
✓ Radiator | ✓ Base Fuel Tank Included |
✓ Air Cleaner | ✓ No Control Panel, Converter, or PTO Drive |
✓ Oil Pump and Water Pump | ✓ No Core Charge |
✓ Oil Cooler | ✓ Run tested before shipment |
✓ Oil Filters | ✓ Standard 12 Months Parts Replacement Warranty (Engine Only) |
✓ Oil Pan (Front Sump, 20 qt) | ✓ 1 or 2 Year Parts/Labor Extended Warranties Available |
✓ Intake and Exhaust Manifolds |
Cummins 6CT Power Unit Specs:
Weight: | 1545 lbs (Engine Only) |
Configuration: | Inline 6, 4-Stroke |
Displacement: | 8.3 Liters, (504.5 in) |
Horsepower: | 260 HP @ 2200 RPM |
Torque: | 256 ft/lbs |
Fuel System: | Mechanical Inline Pump |
Give us a call today at 844-340-4114 for immediate sales and support for the Cummins 4BT, Cummins 6BT or CAT 3306. If you have any questions check out our FAQ Page. We are always ready to help or just listen to your crazy off-roading adventures!